 |
 |
 |
|
|
|
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31
With most of the small bits now bolted on, it's just about ready for the head. Being that this is an original 998 block, not even bored over. I could use original rings on the pistons. The 12G295 head was milled down 67 thou to accommodate the 998 block.